- Видео 9
- Просмотров 81 669
cargoudel
США
Добавлен 13 янв 2008
RT McGee
SocketCAN Ethernet Tunnel using isotptun — Internet over CANBus
A demo using Linux SocketCAN userspace utilities (isotptun) and build-in kernel drivers.
No custom software was created or used for this demo.
University of Delaware - Transport Electrification Center
No custom software was created or used for this demo.
University of Delaware - Transport Electrification Center
Просмотров: 949
Видео
SAAB 9-3 Disassemble ECM 2003-2011 PCB Repair T8 ECU ECM Codes P0201, P0202, P0203, P0204, P0245
Просмотров 41 тыс.3 года назад
This info is the same for all T8 ECMs. Codes P0201, P0202, P0203, P0204, P0245 with / intermittent hard starting, rough running, white smoke, or over-boosting issues. We are gonna replace the most common cause of SAAB 9-3 T8 ECU failure: the TPIC46L02 that drives the injectors and the wastegate. There are potentially other bad chips but always start with that one if you are getting all the code...
Freescale NXP CodeWarrior HCS12(X) 5.2 - Add missing derivatives MCUs
Просмотров 6 тыс.8 лет назад
Download & questions: community.nxp.com/thread/430483 These video steps are for Vista,7,8,10. NOT for XP (separate steps in forum). CodeWarrior Development Studio for HCS12(X) Microcontrollers (Classic IDE) v5.2 Add these micros derivatives back to 5.2 (see top link for full list). HC12 Automotive Family MC68HC812A4 MC68HC912B32 MC68HC912D60 MC68HC912D60A MC68HC912DG128 MC68HC912DG128A MC68HC91...
USBDM CodeWarrior 6.3 5.1 5.2 Windows 10 x64 Install and Update Firmware
Просмотров 13 тыс.8 лет назад
sourceforge.net/projects/usbdm/files/ to get USBDM_Drivers_4_12_3_Win_x64.msi USBDM_4_12_1_262_Win.msi How to install CW 5.2 (and adding missing device support) community.nxp.com/thread/430483 How to install CodeWarrior 6.3 in Windows 10 or 11 www.cvorg.ece.udel.edu/2021/03/24/how-to-install-codewarrior-6-3-classic-in-windows-10-or-7-x64/
Art in Science at University of Delaware - Computer and Electrical Engineering
Просмотров 2218 лет назад
Art in Science at University of Delaware - Computer and Electrical Engineering
NXP Freescale CodeWarrior Classic 6.3 Windows 10 & 7 64-bit HCS08 RS08 CFV1 **Old Method See Desc**
Просмотров 17 тыс.8 лет назад
See NEW one step method here: www.cvorg.ece.udel.edu/2021/03/24/how-to-install-codewarrior-6-3-classic-in-windows-10-or-7-x64/ This video shows the old method. Don't use it. Use the link above.
Mountain valley view between Matsumoto and Nagano
Просмотров 358 лет назад
Mountain valley view between Matsumoto and Nagano
Newark Delaware Assembly Plant - Dodge Durango / Chrysler Aspen Hybrid vehicle news
Просмотров 4,7 тыс.10 лет назад
I do not own this content. It is owned by UAW-Chrysler National Training Center.This video is circa 2008. The content was recovered from a DVD from the former Newark Assembly Plant in Newark Delaware.
The processor expert does not support mcu mc9s12t64, how do I solve it?
Hello. Is there a similar way to install in Windows 10 CodeWarrior Development Studio MPC5xx Edition, v8.1?
Please help on how to program with USBDM Code warrior HCS12
I’ve not actually sat down to resolve how to sshd over can, but it’s nice to see far more throughput than ssh can be pushed over CAN. Cool.
So sad! All the excitement and enthusiasm that these folks had building the pilot vehicles for the new Hybrid Durango and Aspen only to have them cancel production 2 months into the run and then shut the plant down in December of 08. I just found one of the less than 800 hybrids built at that plant in the junk yard recently.. It was a black 09 Durango built the 10/29/08.. She was something back in her prime!
I've got a 9-3 which starts and runs good, but it sounds like it's not firing on some of the cylinders sometimes. It happens when the engine is cold. When the engine is warmed up, that problem is gone. And it drops the rpm faster than normal aa well during a gearchange. And I got a fault code P0686 which has something to do with the ECU. It's quite difficult to explain, but what du you think could be the problem?
I would search the trionic tuner forum.
Will the same chip work in the ECM for a 2010 2.0 9-3x?
Yes.
Would u do 2 ecms ,I have 2 saabs both have this issue im sure ,I can send both to u I'd really appreciate it,sent 1 away to g7 computers and they never opened it up nor fixed problem I wasted 250 bucks for nothing please mess me lmk asap thanks
Sorry. I don’t do outside work.
Hi, I had a question about the ECM relocation kit you mentioned; apart from extending the ground wire for the ECM, was there any additional wiring you had to do for the relocation kit?
You have to extend around 4 wires and a ground. Pretty easy if you comfortable with simple electrical / electronics work.
What if I don't have P0245 but have P0201, P0202, P0203, P0204 ?
Could be if the problem is very intermittent.
Do I need to back up my ECU before the repair
Not required but recommended in case you destroy the unit. The chip we replace has no memory.
What 5 wires did you need to extend for the ecu relocate?
When I bought the relocation kit, bracket, etc., linked in the description, it came with a video I used to do the work. But when you unwrap the harnesses, it's pretty apparent which wires are too short of reaching.
Wow great information thanks dude! Links super helpful as well.
Glad it was helpful!
Hello good morning sorry for my English I use translator .. I have not read all the comments maybe I have already asked this question .. kindly I would like to know if after replacing the chip you have to program the ECU or is it not necessary to start it? thank you
The chip has no memory. But I would make a backup of your original ECU incase you destroy it while working in it. It’s easy, there is a link in the description.
@@cargoudel ok Thank you !!!
Did you replace the injectors as well? Had my Ecu fixed and the repair place required I changed my injectors as well. Just curious what your thoughts are regarding this. Thanks for the video!
I wouldn’t assume the injectors are bad.
Would you do mine?
I would open it up for them and take it to a local electronics repair shop and send them this video.
Can I just pull my ecu and send it to you for repair? 😁
I would open it up for them and take it to a local electronics repair shop and send them this video.
Is the ecu backup necesary?
You should back it up before you try to open it up.
Question, After you replaced the chip was it plug and play with all the memory secure?
There is no memory in the chip I replace in the video, so yes. No need to program or reprogram anything after replacing the chip.
Bad image resolution
My video is obsolete ... use the ONE-step method in the description.
Gray video man , can you tell me where is the ECU located in that car ? I'm looking for mine but I can not found it
It's on the engine to the left of the turbo intake.
Hi my T8 ECU has come up a Po606 code is there anything i can do to fix it as they want a $1000 for a refurbished one here in Australia or whats the best way to go about it
If the car has been tuned it could be bad settings / bad map. If the car is 100% stock, it's probably the processor or may be corroded connectors. I would check out the website trionic tuners for help with ECUs, register for the site, and use the search.
Got P0691 fan speed 1 not working, sympthom limited torque and no A/C working Power is fluctuating when hitting a throttle when driving ... Ecu failing?
I would agree. There are some good videos on cloning your ECU to one from a junkyard.
Can you provide a link to the page where i can buy the chip?
Goto mouser.com or digikey.com and search TPIC46L02DB
@@cargoudel Yep, chips are less than $3.50 a piece
Hello, i got mine replaced cause of an intermittent P1682 code. After the replacement of ecu, the code is gone. I still have the old one and i wonder if i can fix it and use it as a backup. Can you help me out with this?
Looking at some schematics on trionic tuner site, that code is for the main relay which is on the other TPIC but that one is near the top under the cross bar near where it hinges.
My ecu is 55352688, this repair is also valid for mine ?? Thank you.
Yes. Same unit type. I’m just covering one type of chip that can go bad and correlated with certain error codes.
This guy must know what he's doing if he's messing with his PCM in the garden 🤣
Hey man! That French glue doesn’t smell good inside my shop when heated up. 😂
👍👍👍👍👍👍👍👍👍
Hello sir , is it p0245 p0201 po204 p0606 is this chip the problem ? thank u
Hard to say 100%. P0606 may mean a CPU issue. I would search it on the trionic tuner forum website.
Hello! Thank you very much, I saved my ECU with your video. How does your ECU work now?
It's working!
Be sure to use silicone that doesn't cure out citric acid
I agree with this.
Have you tried to open a B284 ECU?
No, but check out the trionic tuner forum.
Great work! Thanks for sharing
Now just make it display Tech2 codes on SID.
i’ve got a MyMetro SmartRide that gives me the codes in this order for my 2005 9-3 2.0t P0204 P0202 P0201 P0300 is it not be the chip you are fixing here? if not do you know what it could possibly be? Thank You
Maybe not that chip in my video. No waste-gate, no code for cyl 3. Not sure. I would search around on www.trionictuning.com
@@cargoudel Thank you
Do you offer the service to replace the chip on the side. I have extra bad ECU in hand from these code.
I don't. But if you open it for them, many electronics or tv repair shops can do this work.
@@cargoudel thanks.
Hi,where do you get the chip to repair ecu.
Goto 5:26
great video. my 08-93 got u2105 and p0601, you know which one is failed？
Search u2105 and p0601 on this forum www.trionictuning.com/forum/ There are many possible causes: bad Relay R11, bad ground on ring terminal on ECU, or it could need to be reflashed, or the ECU microcontroller may be bad.
@@cargoudel thank you
You are right that fixed my saab. Had to get tv repair shop to solder it in 95 dollers well worth it.thank you
Good idea.
I’m headed to a computer repair shop tomorrow, wish me luck🤞
Thanks doe this video. I just bought a 07 9-3 and it has literally these codes. I’m glad to see someone out here who knows how to fix this instead of having to send it to Illinois for 600$. I might be coming back here asking for help soon lol…
Where were you able to source that chip from?
@@TheForerunner117 check out 5:26 in the video (mouser)
@@cargoudel I did just buy this car and don’t know much about it yet but it has all the right codes and all I see online is if you have them it’s the ecu so I’m pretty hopeful this works for me. I haven’t seen any smoke or fumes or whatever but the owner did say every once in a while you have to floor it to make it start so is sounds like it’s on the right track. Is there any other ways to confirm the fix will work or is it just worth going for it and seeing what happens? I cleared the codes on the car they imediately returned on next startup so with 260k I’m sure it’s the problem.
@@cargoudel I don’t have one of those fancy reflow deals but I do have a heat gun with adjustable temp and one of those tiny choke down attachments. You think that would work? I could use my laser thermo to keep an eye on temps
@@TheForerunner117 it’s a bit risky. It’s important to flow (add solder) the pads first with a decent iron. I have done it before with a heat gun. You might wanna protect the other parts with aluminum foil. Use the low setting. Don’t use the heat gun with the new chip.
What do you mean 12:55. “Maybe if the ECU is marginal. And has to warm up before start to fail” That is happening to my ECU. I will appreciate any help
You should still replace that TPIC if you are getting 201-204 codes and the 245 wastegate code at the same time when the problem shows itself. I just mean it’ll be harder to test without fully reinstalling, but that open startup test is useful to at least show that you replaced the chip correctly. I have had ECUs that only quit after getting hot and it was also the TPIC.
Do you have to reprogram it after doing this.
Not if it's the original ECU. The chip I show replacing doesn't have code or memory. It's just a MOSFET Gate driver. But I would make a backup in case you screw it up and want to buy a replacement and reprogram and remap. If you make a backup you can buy any almost ECU from any 9-3 from 03-11, but if you don't have the backups you have to get the exact same part number.
Great thank you.
Hola con este procedimiento resuelves el problema común de falla en los inyectores ? Saludos
If you having the P0201, P0202, P0203, P0204, P0245 codes all at the same time (P0245 is important here!). Yes, this is probably the issue. Can't say 100% though. Test it before you close it up.
Please check the description for mistakes and corrections.
do u have a business i need this done
@@michaeltomczyk3311 I don't, sorry about that. But if you can find someone who does surface-mount electronics work, they have access to the right equipment and it's a pretty easy job for them.
Hi did the rebuild work and how long is it going?
A year so far.
Where did you order the part ?
you see this plant manager coming to your facility,,save your money and sell your house ,because your plant is closing,,just pack your crap n go,,do'nt even buy groceries,run just run like forrest gump
Lol he even mentions Tuscaloosa in the beginning. 🥴
had 20 plus years here..life changer when it closed
Has NXP taken down all the posts and download links?
Yea they did, but I updated the link in the video description avoiding their forums.
@@cargoudel Thanks. I also managed to get my stuff to partially work in a funny way, I installed first in Windows XP, then copied it over :D paalijarvi.fi/tgblog/2020/12/01/getting-freescale-codewarrior-6-3-to-run-on-windows-10-the-hard-way/
@@JannePaalijarvi yes! I saw your post a few days ago on your blog and added a comment (that is pending approval) that links to the new one step process.
@@cargoudel Damn, I can't see it in queue.. Would it be possible to add again?
@@JannePaalijarvi I added the link in the description to my university blog post. Might be good to have a link on your blog post as a alternative method.
Best 10.5 years of my life..Miss this place
It's a school now ain't it?
Make them with Column Shifters again!
What about win7 32bit? Can u help me please?
It's very similar just use the USBDM_Drivers_4_12_3_Win_x32.msi file.
I own a 2003 Durango SXT that was built in this plant.